faxing vg224

Unanswered Question
May 1st, 2008
User Badges:
  • Silver, 250 points or more

Has anyone got a tested set up for a MGCP vg224. We are having problms with inbound- no clock slips. The calling fax machine is ringing but there does not seem to be any exchange of tones so they do not move from a Voice call to fax. thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Wed, 05/07/2008 - 12:05
User Badges:
  • Silver, 250 points or more

To configure properly the MGCP Gateway for Fax Pass-Through these commands must be added to the gateway.

no ccm-manager fax protocol cisco

mgcp modem passthrough voip mode nse

mgcp modem passthrough voip codec g711ulaw


http://www.cisco.com/en/US/tech/tk652/tk777/technologies_tech_note09186a0080114565.shtml

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml

http://www.cisco.com/en/US/docs/routers/access/vg224/hardware/installation/guide/hig.html


Actions

This Discussion