Could you tell me!!!
I have ASA 5510 and two Pix 515 and i also connect VPN. On the ASA on Port E0/0 connect to ISP1 and E0/1 connect to Lan and Port E0/2 connect to ISP2.So The VPN connect to ISP1 to site A is OK but The ISP 2 connect to Site B it doesn't work.
Do you have advice for me ? and Do you have any document for tell one ASA one port connect to one site and other port connect to other site.
Please see in the attach file..
What is the destination addresses for the second tunnel. as per the configuration i think it might be 192.168.2.0 series.
If it is 192.168.2.0 series then add the follow route.
route online 192.168.2.0 255.255.255.0 10.10.10.10
I think firewall is taking the outside interface path when you are establishing the second tunnel.