Debug IP Packet Output

Unanswered Question

Hi Guys, Can anyone interpret what these messages mean or point me to a place where i can get the interpretation:

IP: tableid=0, s=192.168.36.6 (local), d=192.168.36.254 (Vlan36), routed via RIB

IP: s=192.168.36.6 (local), d=192.168.36.254 (Vlan36), len 77, output feature, Check hwidb(63), rtype 1, forus FALSE, sendself FALSE, mtu 0

IP: tableid=0, s=192.168.36.6 (local), d=192.168.36.254 (Vlan36), routed via RIB

IP: s=192.168.36.6 (local), d=192.168.36.254 (Vlan36), len 313, output feature, Check hwidb(63), rtype 1, forus FALSE, sendself FALSE, mtu 0

IP: tableid=0, s=192.168.36.6 (local), d=192.168.36.254 (Vlan36), routed via RIB

The full message is attached below


Thanks

O.




Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mchin345 Thu, 05/08/2008 - 06:10

1) Test another cable that you know it works instead of the one you have attached to the port.

2) Make sure the Speed and the Duplex configuration are the same in both points.

I think it does not affect the operation of the switch

Actions

This Discussion