ringdown on FXO port

Unanswered Question
May 2nd, 2008
User Badges:
  • Silver, 250 points or more

Hello:

I am trying to configura a ringdown on a FXO port, configuration seems to be fine, when i pickup my phone it gives me a message "Your call cannot be completed"


Here is my debug VPM signal,


May 2 13:36:40.209: htsp_timer_stop3 htsp_setup_req

May 2 13:36:40.213: htsp_process_event: [0/3/1, FXOLS_ONHOOK, E_HTSP_SETUP_REQ]fxols_onhook_setup

May 2 13:36:40.213: [0/3/1] set signal state = 0xC timestamp = 0

May 2 13:36:40.213: htsp_timer - 500 msec

May 2 13:36:40.465: htsp_process_event: [0/3/1, FXOLS_WAIT_DIAL_TONE, E_DSP_SIG_1100]fxols_power_denial_proc

May 2 13:36:40.465: htsp_timer2 - 1000 msec

May 2 13:36:40.465: htsp_timer_stop

May 2 13:36:41.465: htsp_process_event: [0/3/1, FXOLS_WAIT_DIAL_TONE, E_HTSP_EVENT_TIMER2]fxols_timer2_proc

May 2 13:36:41.465: htsp_timer_stop

May 2 13:36:41.465: htsp_timer_stop2

May 2 13:36:41.465: [0/3/1] set signal state = 0x4 timestamp = 0

May 2 13:36:41.469: htsp_process_event: [0/3/1, FXOLS_ONHOOK, E_HTSP_RELEASE_REQ]fxols_onhook_release


I see there is an FXOLS_WAIT_DIAL_TONE, message. Is that mean it is expectiong a dial-tone from the telco?


Thanks



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rajesh Revuru Fri, 05/02/2008 - 08:21
User Badges:
  • Silver, 250 points or more

Ken:


Thanks for your reply. Actually the problem ended up improper circuit termination to patch panel. It is working now after fixing the ckt.


Actions

This Discussion