Boot 3650 from TFTP

Unanswered Question
May 2nd, 2008
User Badges:

How can I set the switch so that it loads the startup-config file from a TFTP server. The goal is when switches are moved between locations, they will get thier config info from the local TFTP server (same IP in each location).


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Sushil Kumar Katre Fri, 05/02/2008 - 07:54
User Badges:
  • Gold, 750 points or more


Router1#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router1(config)#service config

Router1(config)#boot network tftp Network-auto

Router1(config)#boot host tftp Routers-auto



You need to have Network-auto and Routers-auto files [wheere you would have the configuration]in the TFTP server.

-> Sushil


This Discussion