05-02-2008 08:10 AM - edited 03-15-2019 10:25 AM
Hi everybody
I have a CCM 4.2(3)sr3a and many sites with IP telephony. Each site has its Gateway, a Cisco 2811 with FXO cards installed to make and receive calls. The IOS versión of the routers is c2800nm-advipservicesk9-mz.124-3h.bin.
Some of the FXO ports in several sites don't work properly, they block and when a call is received/made in those ports, it gets a silence. when it happends, the "show voice port summary" command shows an status "up down".
I have to restart the port and in the most difficult cases I have to restart the router to get the normal status "up dorm" at the ports if they are idle. The case doesn't seem to be in a particular router, it happens in different ports, in different routers and at different times.
I wonder if it is a bug in the IOS.
Could you please help me with this issue?
this is the relevant configuration of the ports:
voice class custom-cptone DISCONNECT
dualtone disconnect
frequency 421
cadence 200 200
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone DISCONNECT
timeouts call-disconnect 0
timeouts wait-release 1
timing hookflash-out 50
connection plar opx 29035
description CABECERA_PBX
station-id name ENTRADA_1
station-id number 2434928
caller-id enable
and the normal in/out dial-peers
Thanks to everybody
Nicolay
Solved! Go to Solution.
05-02-2008 08:18 AM
05-02-2008 08:18 AM
Can you try 12.4(3j) ?
That to align with the latest bug fixes.
05-28-2008 05:40 AM
Hi Paolo
I update the IOS in many of the routers of the network. it seems to be very stable, I think it solved the problem, but I used a newer IOS version: 12.4(19).
thanks for your advice.
Nicolay
05-28-2008 05:51 AM
Good, thanks for the appreciation and good luck!
Whn you want new features from the router w/ cme 4.2 I can suggest XW7 that is also stable now.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: