Solved: Service Button Issues on IPT Phones

Aun Iqbal · ‎05-02-2008

Hi guys,

When I hit the services button on my phone (or any of the phones in my room) it gives me a "To set up speed dials and other services for your phone, please go to (https://192.168.40.5:8443/ccmuser/showHome.do)" dialog. What should I do to resolve this?

I am using CUCM 6.1.1a and my phones are 7961, 7965 & 7911.

cheers, Aun

Jaime Valencia · ‎05-04-2008

you have not subscribed the User Device Profile you're using to EM, that's why you get that.

you missed that step from the config

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎05-03-2008

subscribe the phones to services, you get that because you haven't and that's the default message

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Aun Iqbal · ‎05-03-2008

thanks mate,

I ahev subscribed the phones.

Is there any other way to confirm if the phones are subscribed???

Aun Iqbal · ‎05-03-2008

hi, sorry I wasnt clear in my first question...my apologies.

Extension Mobility services are running fine on CUCM.

when I hit the services button, I can see the Extension Mobility services ---> When I select the Ext. Mob. Services ---> I can enter my login ID and PIN Number. -----> and it logs me in successfully, but then soon after I get the following screen on my LCD when I press Services button:

_________________________________________________________

"To set up speed dials and other services for your phone, please

go to (https://192.168.40.5:8443/ccmuser/showHome.do)"

UPDATE EXIT

__________________________________________________________

when I hit UPDATE Button .... nothing happens.

So I am logged in................ BUT I cannot log out. ....any idea how do I logout ????

Secondly, I dont know what to do with that message ....how do I get rid of it ?????

Any help appreciated

Cheers, Aun :)

Jaime Valencia · ‎05-04-2008

you have not subscribed the User Device Profile you're using to EM, that's why you get that.

you missed that step from the config

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate