cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
390
Views
0
Helpful
2
Replies

Multilink PPP over ATM problem

Hi,

I am trying to configure a multilink ppp over ATM links.

I have 2 pvc 20 Mb each (1 microwaves 1 optical fiber)

I have been following the documentation but I still having problems

I get the following error:.May 2 20:57:19: %ATM-3-MLPOATM_ERROR: MLPoATM not configured properly on

Link Virtual-Access2 Bundle Multilink11 :dLFI

May 2 20:57:19: SP: ltl operation not ok for vlan 1033 and index -1

.May 2 20:57:23: %ATM-3-MLPOATM_ERROR: MLPoATM not configured properly on

Link Virtual-Access2 Bundle Multilink11 :dLFI

May 2 20:57:23: SP: ltl operation not ok for vlan 1034 and index -1

My config on each interface is as follow:

interface ATM12/0/0.78 point-to-point

pvc 0/78

abr 20000 20000

encapsulation aal5snap

protocol ppp Virtual-Template1

interface Virtual-Template1

bandwidth 20000

no ip address

load-interval 30

ppp authentication chap

ppp multilink

ppp multilink group 11

service-policy output QoS_PLC_STM_77

end

interface Multilink11

ip address 200.1.147.161 255.255.255.252

ppp multilink

ppp multilink fragment delay 20

ppp multilink interleave

ppp multilink group 11

end

I will really appreciate your help. any suggestion?

Thanks

Regards

LP

2 Replies 2

mounir.mohamed
Level 7
Level 7

Hi,

Could you provide me with *Show version* / *show policy-map* of this box, Cisco relate this message to alot of code bugs or incorrect or incomplete MLPoATm configurations in many documents.

http://www.ciscopowerednetworks.com/univercd/cc/td/doc/product/software/ios124/124sup/124sms/124smsv1/sm_02h.pdf

Example:

cosmetic bug (CSCdz87121) on Cisco 1721 running 12.2(x) code

Hi Mounir, I attache the sh-running. Here is the show policy-map

policy-map QoS_PLC_STM_77

description QoS_Hacia_SanTome_PVC77 (BW Avail = 22 Mbps)

class Notes

police 16000000 conform-action set-dscp-transmit af41 exceed-action set-dscp-

transmit af43 violate-action drop

class Navegar

police 3000000 conform-action set-dscp-transmit af11 exceed-action set-dscp-t

ransmit af13 violate-action drop

class Aplic_Corporativas

police 1000000 conform-action set-dscp-transmit af31 exceed-action set-dscp-t

ransmit af33 violate-action drop

class Windows

police 2000000 conform-action set-dscp-transmit af21 exceed-action set-dscp-t

ransmit af23 violate-action drop

class class-default

fair-queue

random-detect dscp-based

Thanks for your time

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: