1130AG's - Associations as ccx-client and 4500-radio ?

Unanswered Question
May 4th, 2008

Office has 4 1130AG's. Same SSID's. Windows XP SP2 using Windows Wireless (WZC) Laptops moving about the office transfer from AP to AP: Except for the most recent AP Addition. This AP was added within the last 60 days. If I am located next to it, my association remains to the next nearest AP. If I disconnect from the AP; I will then connect to the AP next to me. I have checked the configurations for all AP's to make sure they're the same. Aside from the slight firmware difference (mentioned below) they're the same. I used the Web Interface.

All the other associations from the client to the AP's are as ccx-client. Any associations to the newly deployed AP are as 4500-radio. I believe this is related to our problem.

Any help would be greatly appreciated.

*the firmware on the newest WAP Cisco 1130ag was (system) v.12.3(8)JA2 : (bootloader) v12.3(7)JA1 (Radio Firmware) 5.90.11.

- All of the other units were at: (system) v.12.3(8)JEA : (bootloader) v12.3(7)JEA (Radio Firmware) 6.00.1.

- Also found that the client associations for all the previous WAP were using ccx-client, whereas the latest wap associations were using 4500-radio.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kevinwatkins2010 Mon, 05/05/2008 - 12:33

Addional Information:

When connecting to the previous AP's the 4500-radio laptop is associated as ccx-client.

So it must be something on the 1130AG.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode