Unanswered Question
May 5th, 2008

I am having an issue with fax machines connecting and transmitting.

I have a 2821 router with 4 total PRI connections.

2 connections go to a Mitel PBX and 2 go to the PSTN.

I have a fax machine on the Mitel side try to fax and it fails. If I do a show controllers t1, I see a ton of frame errors on the PRI's to the PBX but not on the PSTN PRI's.

If I switch the clock select from the backplane to on of the PBX PRI's, the PSTN PRI's start throwing errors.

How can I configure these clock sources?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Paolo Bevilacqua Mon, 05/05/2008 - 13:08

You should have pstn line clocking and select, pbx clock internal, participate but no select.

jgentsch Tue, 05/06/2008 - 10:23

Can you explain this further?

0/0/0 and 0/0/1 are to the PSTN

0/1/0 and 0/1/1 are to the PBX.

Paolo Bevilacqua Wed, 05/07/2008 - 02:59

pstn lines use line clock and select, pbx internal clock and participate only.

What is that you don't understand ?


This Discussion