Strange problem with BGP over MPLS

Unanswered Question


We have an MPLS link between cityA & cityB

BGP is configured to advertise the connected network on both the routers.

I can see the routes(LAN IP Block) of CityA on CityB router but on cityA router there is only one BGP route which is of the WAN IP,

Please suggest the fix for the same

Thanks in advance.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
mounir.mohamed Mon, 05/05/2008 - 22:52

Hi Negesh,

As far as i understand your LAN network missing from CityA side.

First of all we need to check if the network begins received but not selected or doesn't received at all.

So kindly provide the output of

CityA-Router#Show ip bgp summary

CityA-Router#Show ip bgp

If the network received but not selected we can go further and troubleshoot it, but if it's doesn't received you have to open a case with your Service Provider regarding that.

Please rate helpful posts.

Best Regards,

Mounir Mohamed


This Discussion