cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
390
Views
0
Helpful
2
Replies

AAA for Cat OS switch

jong_r0602
Level 1
Level 1

Hi,

I having a problem on how to create a Shell command authorization for my Cat OS switches. My ACS version is 3.3

Appreciate you help

Thanks,

Jong

1 Accepted Solution

Accepted Solutions

Jagdeep Gambhir
Level 10
Level 10

Jong,

Here are the CAT OS commands,

Set Based -

Console> (enable) set tacacs server [IP] [primary]

set tacacs key [key]

set tacacs attempts [number] (optional)

set localuser user [user] password [password] privilege 15

set authentication login local enable

set authentication login tacacs enable [all | console | http | telnet] [primary]

set authorization exec enable tacacs+ [deny | none] [console | telnet | both]

set authorization commands enable [config | all] tacacs+ [deny | none] [console |

telnet | both]

Here is the link for setting up command authorization , this example is for IOS but it you understand the concept, you should be able to set it up on CAT OS.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

View solution in original post

2 Replies 2

Jagdeep Gambhir
Level 10
Level 10

Jong,

Here are the CAT OS commands,

Set Based -

Console> (enable) set tacacs server [IP] [primary]

set tacacs key [key]

set tacacs attempts [number] (optional)

set localuser user [user] password [password] privilege 15

set authentication login local enable

set authentication login tacacs enable [all | console | http | telnet] [primary]

set authorization exec enable tacacs+ [deny | none] [console | telnet | both]

set authorization commands enable [config | all] tacacs+ [deny | none] [console |

telnet | both]

Here is the link for setting up command authorization , this example is for IOS but it you understand the concept, you should be able to set it up on CAT OS.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

HI JG,

Wow! It works also in my CAT OS switches.

Thanks a alot,

Jong

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: