Im looking over a design of a remote site, and I am a little confused
The interface on router for the lan is 192.168.96.6
However, the cat switch that is connected
to that interface has an IP address of
192.168.97.6 (vlan1) learned via dhcp
router#GigabitEthernet0/1 is up, line protocol is up
Internet address is 192.168.96.251/23
router#sh cdp neighbors gigabitEthernet 0/1 det
-------------------------
Device ID: LAN1
Entry address(es):
IP address: 192.168.97.6
How can you have 2 interfaces connected
on different networks?
And the users all getting 192.168.97.x
ip's while the router they are connecting
to has 192.168.96.x on the interface?
and here is the config for the cat switch
interface Vlan1
ip address dhcp
no ip route-cache
ip default-gateway 2x6.xx.xx.209
ip http server
access-list 25 permit 192.168.0.0 0.0.255.255