Configuring ASA5505 for DMZ

Unanswered Question
May 6th, 2008
User Badges:

I have bought an ASA5505-UL-BUN-K9. When trying to configure the DMZ interface, I get this message: "According to the available licence, I must block the traffic from DMZ to an interface (inside or outside)" I have chosen to block the traffic from DMZ to the inside. Now I need some servers on DMZ to communicate with some servers on the inside interface. My question is: is this operation possible with such a product, or shall I buy a full licence for DMZ?


Kind regards


Mirco Frazzoni

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
JORGE RODRIGUEZ Tue, 05/06/2008 - 12:26
User Badges:
  • Green, 3000 points or more

Mirco,


It is possible , but based on licensing documentation the current license you have does not provide for full DMZ support for that you need Security plus license ASA5505-SEC-BUN-K9, refer to latest cisco license specs.



http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd8048dba8.html


-HTH

Jorge

Actions

This Discussion