05-06-2008 06:55 AM - edited 03-11-2019 05:40 AM
I have bought an ASA5505-UL-BUN-K9. When trying to configure the DMZ interface, I get this message: "According to the available licence, I must block the traffic from DMZ to an interface (inside or outside)" I have chosen to block the traffic from DMZ to the inside. Now I need some servers on DMZ to communicate with some servers on the inside interface. My question is: is this operation possible with such a product, or shall I buy a full licence for DMZ?
Kind regards
Mirco Frazzoni
05-06-2008 12:26 PM
Mirco,
It is possible , but based on licensing documentation the current license you have does not provide for full DMZ support for that you need Security plus license ASA5505-SEC-BUN-K9, refer to latest cisco license specs.
-HTH
Jorge
05-07-2008 07:07 AM
Jorge,
Thanks for your help.
Best Regards
Mirco Frazzoni
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: