AAA for PIX 7.2(2)

Answered Question
May 6th, 2008
User Badges:

Hi,

Im having a problem on my newly upgrade PIX 7.2 (2). It seems that my authentication is not working. It keeps authenticating using my local username not on my ACS. Heres my config


aaa-sever TACACS+ protocol tacacs+

aaa-server TACACS+ (inside) host 172.x.x.x key

aaa authentication enable console TACACS+ LOCAL


ACS config:


AAA client: IP add

AAA key: same with PIX


Please help me.


Thanks,

Jong

Correct Answer by smahbub about 9 years 2 months ago

The reason for the AAA authentication to fail may be one of the following:

1)AUTHENTICATION Key mismatch

2)user password mismatch.

3)error in configuration


Check if the keys are configured properly on the device and also for username and passwords.


refer the following url for more information:

http://www.cisco.com/en/US/docs/security/pix/pix72/release/notes/pixrn722.html#wp201347

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
smahbub Mon, 05/12/2008 - 11:07
User Badges:
  • Silver, 250 points or more

The reason for the AAA authentication to fail may be one of the following:

1)AUTHENTICATION Key mismatch

2)user password mismatch.

3)error in configuration


Check if the keys are configured properly on the device and also for username and passwords.


refer the following url for more information:

http://www.cisco.com/en/US/docs/security/pix/pix72/release/notes/pixrn722.html#wp201347

Actions

This Discussion