cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
412
Views
0
Helpful
2
Replies

AAA for PIX 7.2(2)

jong_r0602
Level 1
Level 1

Hi,

Im having a problem on my newly upgrade PIX 7.2 (2). It seems that my authentication is not working. It keeps authenticating using my local username not on my ACS. Heres my config

aaa-sever TACACS+ protocol tacacs+

aaa-server TACACS+ (inside) host 172.x.x.x key

aaa authentication enable console TACACS+ LOCAL

ACS config:

AAA client: IP add

AAA key: same with PIX

Please help me.

Thanks,

Jong

1 Accepted Solution

Accepted Solutions

smahbub
Level 6
Level 6

The reason for the AAA authentication to fail may be one of the following:

1)AUTHENTICATION Key mismatch

2)user password mismatch.

3)error in configuration

Check if the keys are configured properly on the device and also for username and passwords.

refer the following url for more information:

http://www.cisco.com/en/US/docs/security/pix/pix72/release/notes/pixrn722.html#wp201347

View solution in original post

2 Replies 2

smahbub
Level 6
Level 6

The reason for the AAA authentication to fail may be one of the following:

1)AUTHENTICATION Key mismatch

2)user password mismatch.

3)error in configuration

Check if the keys are configured properly on the device and also for username and passwords.

refer the following url for more information:

http://www.cisco.com/en/US/docs/security/pix/pix72/release/notes/pixrn722.html#wp201347

Thanks its working now,

Thanks,

Jong

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: