OPX mistake!

Unanswered Question
May 6th, 2008
User Badges:

Dear all.

I have a pbx with E1 trunk and a router with vwic and FXS port.

i want to set my fxs port as one on pbx extension.

here is my config;

**************************

the e1 controller is configured.

#dso-group 1 timeslot 1 type fxo-loops-start


#voice-port 0:1

#connection plar 4001

#voice-port 0/1

#dial-peer voice 1 pots

#destination-pattern 4001

#port 0/1

**********************

but whehn i dial from pbx phone to 4001 nothing happend!!

the pbx condfiure is errorless.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Wed, 05/07/2008 - 02:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Usually E1 PBX will use either PRI or E1 R2, not fxo-loopstart.


Check what your PBX uses.

Actions

This Discussion