05-06-2008 04:44 PM - edited 03-15-2019 10:29 AM
After configuring the voice gateway, the command 'sh ccm-manager' shows me that the CCM is registered from the voice gateway, but from the the CCM GUI the status is REGISTRATION : Not registrered
IP Address : unknown.
Could you please help !!
NOT REGISTERED. The call manager c
Solved! Go to Solution.
05-07-2008 02:22 PM
that link is not even working, layer 2 is down
check the framing, line-code and also the isdn switchtype. maybe you'll need to call your telco to verify your settings are correct to get the link up
HTH
javalenc
if this helps, please rate
05-06-2008 05:45 PM
does the domain name in cucm matches the hostname + domain if configured?
is the right ISR model selected?
are you configuring the right card in the right slot??
do you already have all the config in the ISR?
if you have dial-peers do they have the application mgcpapp configured??
if possible post your config and let us know the servers ip
BTW, show ccm only shows the udp keepalives being sent and received, not the real registration
HTH
javalenc
if this helps, please rate
05-07-2008 02:51 AM
05-07-2008 12:38 AM
Hi, Can you confirm what is the output when you use the "sh isdn status" command. Does the Layer2 shows "Multiple Frame Established" or "TEI Assigned".
05-07-2008 12:39 AM
Also confirm whats the model of Router you are using.
05-07-2008 02:34 PM
Hi,
Here the router type :
flash:c2801-advipservicesk9-mz.124-11.T_64_192.bin
card : VWIC-2MFT-E1 / PVDM2-64
Regards
05-07-2008 02:08 PM
Hi,
It shows TEI_ASSIGNED
Regards
05-07-2008 02:22 PM
that link is not even working, layer 2 is down
check the framing, line-code and also the isdn switchtype. maybe you'll need to call your telco to verify your settings are correct to get the link up
HTH
javalenc
if this helps, please rate
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: