05-06-2008 11:29 PM - edited 03-15-2019 10:29 AM
Hii,
In CCM 5.1 , can we generate the missed call reportin CDR? if possible plzz tell me the procedure
plz help me
thanks & Regards
Soma
05-13-2008 05:52 AM
Yes we can generate the missed call reporting CDR in CCM 5.1.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/4_1_3/ccmsrva/sacar1.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/4_1_3/ccmsrva/sacar2.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/4_1_3/ccmsrva/sacarrpt.html
05-13-2008 07:24 AM
hii,
thanks for reply. those are the very good document. but I didn't get any information about that How to generate the miss called in CDR Report . please sent me the procedure for missed call configuration in CDR,
Thanks & Regards
Soma
05-13-2008 09:29 AM
missed calls should show up as 0 duration if you have that parameter enabled, since they were never connected they should show up that way
HTH
javalenc
if this helps, please rate
05-14-2008 01:43 AM
Dear,
Thanks for reply.that means u telling about
'CDR Log calls with zero duration flag' should be enable? I already enabled this parameter , but still now its not generated any zero duration calls in CDR Report.
So plz suggest me.
thanks & regards
Soma
12-23-2008 12:58 PM
hi
is this allready solved .. can you perhaps share the solution .. thanks in advanced
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide