05-07-2008 04:03 AM - edited 03-15-2019 10:30 AM
Hi all. Take a look at this:
http://www.cisco.com/en/US/docs/voice_ip_comm/sbcs/hardware/quick/guide/uc5_tele.html
Now basically i need to set up a network for a new customer, and its going to be exactly like that, but with a 2801 instead of a UC520.
At head office ill have a 2801, that will be connected to a DSL router.
At the remote site ill have an 877, and im hoping to make a VPN tunnel through and terminate it on the 2801. Is this possible?
Also another question I have, I need to install an SBS server at head office too. This will need to be visible on the Internet because it'll have exchange on it. Can I set the router to pass all traffic through to the 2801, then let the 2801 send traffic off to the SBS server?
Solved! Go to Solution.
05-07-2008 05:56 AM
Sure, you can do these things.
Hope this helps, please rate post if it does!
05-07-2008 05:56 AM
Sure, you can do these things.
Hope this helps, please rate post if it does!
05-07-2008 06:23 AM
yes just wanted someone to check it over make sure I wasnt doing anything odd
Thanks mate :)
05-07-2008 02:08 PM
No problem, thanks for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: