Redirect to specific E1

andrei.goncalves · ‎05-07-2008

Hi !!

i have a gateway 2821 with 4 E1.. (3 with pbx and 1 with my local telecom)

This one with the local telecom is for IPCC entering calls... I'd like the external calls from Agents use this same E1 ..

How can I send the calls to an especific E1 ??

Thanks.

Andrei.

m.batts · ‎05-07-2008

Create a Route Group and place this port into that route group.

Then Add the route group to a new route list.

Then assign whatever route patterns you need to this route list

regards

mark

andrei.goncalves · ‎05-07-2008

Great ! I found it..

One problem... the 3 E1 (QSIG) are there... but the E1 with R2 is not there ... is there any way to put this E1 in the Route Group ?

I entered in the router to see it's config..

---

controller E1 1/0/1

framing NO-CRC4

clock source internal

ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-compelled ani

cas-custom 1

country brazil

metering

category 2

answer-signal group-b 1

dnis-digits min 1 max 4

---