I've a C2960 interconnected with a Siemens X208. I want to fixe the mode in 100Full on the both side,but when I do that, port state remains down and no errors appears on the cisco.
C2960 Siemens Results
100full Auto Siemens 100Half
Auto Auto 100Full /2side
Auto 100Full Down
100Full 100Full Down
Config Cisco
interface FastEthernet0/4
description /// PORT VLAN 11 - VDL 2 ///
switchport access vlan 11
switchport mode access
spanning-tree portfast
I think the problem is on the X208 but if somebody have an idea ...