wireless client can't get dhcp

Unanswered Question
May 7th, 2008
User Badges:

We are having trouble with a wireless client getting a DHCP address when connecting to a repeater AP.

client -> AP-2(Repeater)<------------>AP-1(Root-Bridge)------> Wired LAN

If I assign a static to the wireless client then everything is fine (can pass traffic, etc.). I just cant get an IP. I have posted the configs (relevant parts) to help. The rest of the network (wired part) can get an IP from VLAN 2. It's just the 1 client that uses that AP can't. Please let me know if I am missing anything. Thank you!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ds5879.cisco Wed, 05/07/2008 - 08:06
User Badges:

We have a windows 2003 server providing DHCP for VLAN 2...we have helper addresses on our SVI's to point to the DHCP server. vlan 50 is our mgmt vlan

ds5879.cisco Wed, 05/07/2008 - 08:11
User Badges:

Our dhcp server resides on a completly seperate network. We just have our L3 switch (which acts as our building boundry to the rest of our network) with SVI's on it for various different VLAN's. Each SVI has an ip helper-address on it pointing to the DHCP server. Our dhcp server then has different IP ranges for all of those VLANS and assigns IP's based on what VLAN you are in... yes all other wired traffic is fine in vlan 2...


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode