05-07-2008 09:43 AM - edited 02-21-2020 02:00 AM
I'm switching my remote PIX 501's from dhcpd to dhcprelay so I can hand out IPs from my central W2K3 DHCP server. The 1st and 3rd conversions have worked well, but my 2nd doesn't work for some reason (I've duplicated the configs as much as possible). So, I'd like to view the debugs to see where my problem is, but I can't get any debug messages.
I wasn't getting any dhcp debug messages with:
logging console debug
logging monitor debug
terminal monitor
So today I installed Kiwi Syslog on x.x.50.136 and it's working fine, but I'm still not getting any dhcp debugs.
Here's my current debugging and logging:
PIX-ASEWELL-ARG# no debug all
PIX-ASEWELL-ARG# debug dhcprelay packet
PIX-ASEWELL-ARG# debug dhcprelay error
PIX-ASEWELL-ARG# debug dhcprelay event
PIX-ASEWELL-ARG# sh debug
debug dhcpd packet
debug dhcprelay packet
debug dhcprelay error
debug dhcprelay event
PIX-ASEWELL-ARG#
PIX-ASEWELL-ARG# sh logging
Syslog logging: enabled
Facility: 20
Timestamp logging: enabled
Standby logging: disabled
Console logging: disabled
Monitor logging: disabled
Buffer logging: level warnings, 459 messages logged
Trap logging: level debugging, 6958 messages logged
Logging to inside 192.168.50.136
History logging: disabled
Device ID: hostname "PIX-ASEWELL-ARG"
Any advice?
Thanks.
Tim
05-13-2008 08:03 AM
Go through this Cisco PIX 500 Series Security Appliances Troubleshoot and Alerts
http://cisco.com/en/US/products/hw/vpndevc/ps2030/tsd_products_support_troubleshoot_and_alerts.html
05-13-2008 09:13 AM
I've looked at that, but there's nothing I see that will help me. Did you have a specific article in mind that I should be reading?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide