VG200 - Overhead paging

Unanswered Question
May 7th, 2008

Can anyone tell me what I need to setup overhead paging on a VG200. What plugs to what and the cli commands to do it.

Thank you,

Brian

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Tue, 05/13/2008 - 06:24

Overhead Paging systems work like a standard 2500 phone. It auto answers the call. Cisco CallManager does not have a dedicated intercom or paging feature. However, you can use the Auto Answer feature in Cisco CallManager. Activating this option or button causes the speaker phone to go off hook automatically when an incoming call is received.

To configure Auto Answer, perform these steps:

On the Cisco CallManager Admin page, go to Device > Phones > Select the Extension. Select Enable the Auto Answer feature.

Choose one of these options to activate the Auto Answer feature for the directory number:

Auto Answer Off

Auto Answer with headset

Auto Answer with speakerphone (intercom)

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a008015094e.shtml#conf

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/3_1_1/ccmcfg/b06gtway.html

Actions

This Discussion