Gatekeeper Issue

Unanswered Question
May 7th, 2008
User Badges:

Is it possible to register two CUCM to one gatekeeper and properly route calls between them.


CUCM 4.3 ---> GATEKEEPER <----- CUCM 6.0


CONFIG:


gatekeeper

zone local Cisco2811_GK1 cisco.com 172.24.1.250

zone local Cisco2811_GK2 cisco.com

zone prefix Cisco2811_GK2 561....... gw-priority 5 CUCM60

zone prefix Cisco2811_GK1 704....... gw-priority 5 CUCM43

gw-type-prefix 1#* default-technology

arq reject-unknown-prefix

lrq forward-queries

no shutdown


The Gatekeepers are registered properly in the router but I can only make calls from one CUCM 6.0 cluster to the CUCM 4.3 cluster not the other way.


Cisco2811_GK#sh gateke end

GATEKEEPER ENDPOINT REGISTRATION

================================

CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags

--------------- ----- --------------- ----- --------- ---- -----

172.24.1.10 36555 172.24.1.10 32790 Cisco2811_GK2 VOIP-GW

H323-ID: CUCM60_1

Voice Capacity Max.= Avail.= Current.= 0

172.24.1.20 3346 172.24.1.20 2973 Cisco2811_GK1 VOIP-GW

H323-ID: CUCM43_1

Voice Capacity Max.= Avail.= Current.= 0

Total number of active registrations = 2


Any help would be appreciated. Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion