WS-X6624-FXS in 6509 w/Sup720-3B & IOS 12.2(18)SXE2

Unanswered Question
May 7th, 2008
User Badges:

After installing a WS-X6624-FXS card in our 6509 switch, the card was recognized by the switch but shows to be in a "PwrDown" state. I'm aware this is an old card and is EOL, but we'd like to use it if possible. Have found some notes about IOS version and supervisor version compatability with this card but it's difficult to get a clear answer on this. Is there any version of IOS that would be compatible with both the Sup720's and the WS-X6624-FXS? If not a version compatability issue, any suggestions for getting the card out of this power down state would be most welcome... Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Wed, 05/07/2008 - 16:16
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

goodwinscottns Thu, 05/08/2008 - 07:31
User Badges:

Thanks Rob. I did see this post, but the the conditions were not identical. The post refers to Sup2's and the recommended solution was to upgrade to IOS version 12.2 from 12.1. We have Sup720-3B's and are already running version 12.2.


This Discussion