05-07-2008 09:16 PM - edited 03-15-2019 10:31 AM
Dear Seniors.
This is regd call park. when i retrive a call after parking, it is getting delayed for 4 - 6 seconds for retriving it.After dialing the call park number, it takes 4-6 seconds to retrieve the call. What could be reason. where to check, what to check and how to solve.
pls help me
Regards
Esa
05-08-2008 12:41 AM
05-08-2008 06:41 AM
One of the things I would take a look at is the route plan report of your system. In call routing, there should be an option named "Route Plan Report". It may be different on different CUCM versions.
I had a similar problem with a dial plan for my paging system. I used 321 to trigger a FXO port which is connected to a paging control unit. Not thinking what my dial plan was, I setup a call forward to voice mail dial plan that was 3XXXX (my extensions are 4 digit).
Without realizing what I had done, the phones were now waiting for the interdigit timeout to complete the route pattern and connect me to my paging system.
Hope this helps.
James
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide