05-08-2008 04:38 AM - edited 03-15-2019 10:32 AM
Hi,
I wanted to understand if I can have a UCM cluster with different MCS platforms.
For example MCS 7845 as a Publisher and MCS 7835 & MCS 7825 as a Subscriber.
I feel that technically this should be possible apart from considering the fallback capacity in case of the MCS failure. However I am interested to know if this is technically a feasible option or not.
Has anyone seen or done any such deployments.
Any inputs would be appreciable.
-> Sushil
Solved! Go to Solution.
05-08-2008 04:52 AM
Hi Sishil,
Hope all is well :) There is no requirement that all MCS Servers in a cluster be the exact same models. So, your example would work just fine as long, as you correctly noted, that "Failover" numbers are considered and factored into the equation.
Our MCS boxes are all the same right now but our past deployment had some differences that never caused any issues.
Hope this helps!
Rob
05-08-2008 04:52 AM
Hi Sishil,
Hope all is well :) There is no requirement that all MCS Servers in a cluster be the exact same models. So, your example would work just fine as long, as you correctly noted, that "Failover" numbers are considered and factored into the equation.
Our MCS boxes are all the same right now but our past deployment had some differences that never caused any issues.
Hope this helps!
Rob
05-08-2008 06:22 AM
Excellent Rob. Thanks a lot.
-> Sushil
05-09-2008 04:44 AM
Hi Sushil,
You are most welcome my friend! Sorry for the delay in getting back to you :)
Take care,
Rob
05-09-2008 04:51 AM
No problems Rob.I guess your reply was quick for me :)
-> Sushil
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: