Dot1x problem

Unanswered Question
May 8th, 2008

HELLO ALL:

We are having some problem with Dot1x.When users connect to Dot1x authentication port, users laptops are not getting authenticated with the server.I am attaching the debug output and running config .

Thanks

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
smahbub Wed, 05/14/2008 - 08:16

On interface FastEthernet0/7 Your reauthentication time is set to 7200 seconds which is by default is 3600 seconds.which means that reauthentication will happen every 7200 sec.Your quite mode timing is 5 sec and default is 30 sec.Try using the the default settings for reauth,retransmission and quiet mode timers and check for the issue.Also check for the Dot1x configuration.

refer the following url for the configuration guide:

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00805e7a18.shtml

michael.leblanc Fri, 05/23/2008 - 15:47

Add the following to your configuration:

aaa authorization network default group ias-servers

Actions

This Discussion