Hi Nathan,
Yes, you are right on the money! You do not have to enter a First and Last name as this is optional. In your example the AA would search on Mariam.
The following information is required for adding or modifying a user:
•Username-The user ID. The username must be at least 3 and no more than 32 characters in length. Cisco Unity Express allows only letters, numbers, and the characters underscore (_), dot (.), and dash (-) in user IDs. Users IDs must start with a letter. Do not use spaces in the username.
•(Optional) Full name-First and last name of the user. Enter this name in quotation marks (" ").
•(Optional) Group-Name of an existing group in which this user is a member.
•Password-Temporary password for this user. The password must be at least 3 and no more than 32 characters in length. Spaces are not allowed. When the user logs in to the GUI for the first time, the application requires the user to change the password. The user's password does not expire.
•PIN-Personal identification number. The PIN must be at least 3 and no more than 16 digits in length. When the user logs in to the voice-mail system for the first time, the application requires the user to change the PIN. The PIN does not expire.
SUMMARY STEPS
EXEC mode:
1. username name [create | delete | fullname [first "first-name" | last "last-name" |
display "full-name"] | group group-name | language | password password | pin number]
2. show users
or
show user detail username name
3. copy running-config startup-config
Configuration mode:
1. config t
2. username name [create | phonenumber phone-number | phonenumberE164 full-number]
3. exit
4. show users
or
show user detail username name
5. copy running-config startup-config
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_1/ccm_cli/ch4users.html#wp1060327
Hope this helps!
Rob
