05-08-2008 07:56 PM - edited 03-05-2019 10:51 PM
hello,
I'd like to know about Auto-MDI/MDIX supported ISR's fixed LAN ports?
I found out ISR 800 and 181X seires is supported this.
but others dose not describe supported or not.
Please tell me about this?
regards.
Solved! Go to Solution.
05-08-2008 09:09 PM
I have not seen that MDIX is a feature in all of those products either on the embedded ethernet ports. There are etherswitch modules that do support this feature.
05-08-2008 08:45 PM
A MDIX interface will automatically cross over pairs in your patch cable to reflect a straight through cable or a crossover cable depending on the circumstance. This feature is done in hardware on the device, and not all devices support this feature. Most newer switches, and line cards support this feature.
Mark
05-08-2008 08:56 PM
Mark,
thank you for your answer.
How about 1841(moduler model),2800 and 3800 series?
these models are supported this feature?
datasheet dose not say about this.
yoshifumi.
05-08-2008 09:09 PM
I have not seen that MDIX is a feature in all of those products either on the embedded ethernet ports. There are etherswitch modules that do support this feature.
05-08-2008 09:29 PM
yoshifumi,
Please remember this typically a switching feature.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: