Routing question...

Unanswered Question
May 9th, 2008
User Badges:

Hello,


I want to redistribute an individual static route. I don't want to redistribute all static routes I have on my router. I believe i need to use the "redistribute static route-map" command but am not entirely sure of the correct syntax. I also believe I have to first create the route-map and populate the individual route into it... once again I need some assitance on that. :)


Any help would be appreciated...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2 (1 ratings)
Loading.
guruprasadr Fri, 05/09/2008 - 06:17
User Badges:
  • Gold, 750 points or more

HI William, [Pls Rate if HELPS]


Considering for a Scenario, having the EIGRP as the Protocol:


router eigrp 873

redistribute connected route-map eigrp

network xxx.xxx.xxx.xx 0.0.0.3

neighbor xxx.xxx.xxx.xx FastEthernet0/0.873

no auto-summary


Create an Extended ACL:

=======================

ip access-list extended eigrp

permit ip host xxx.xxx.xxx.xx any

permit ip xxx.xxx.xxx.xxx 0.0.0.7 any


Create an Route-MAP & Match the Extended ACL:

=============================================

route-map eigrp permit 10

match ip address eigrp


Hope I am Informative.


Pls RATE if HELPS


Best Regards,


Guru Prasad R

william.briere Fri, 05/09/2008 - 06:30
User Badges:

Hello Thanks for the reply...


I didn't mention but the protocol is OSPF

william.briere Fri, 05/09/2008 - 06:40
User Badges:

One other question...


Do you see any issue with the address that is being routed being a public IP?


Basically I am routing an individual public IP across my private network and out a different gateway :)

guruprasadr Fri, 05/09/2008 - 06:43
User Badges:
  • Gold, 750 points or more

HI William, [Pls RATE if HELPS]


Doesn't matter, irrespective of Protocol but the Configuration style is same.


/32 Public Address can be routed very well to a different Gateway.


Pls RATE if HELPS


Best Regards,


Guru Prasad R

Richard Burts Fri, 05/09/2008 - 07:29
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Guru


Using an extended access list for a route map to control redistribution makes it unnecessarily complicated. The same result can be acheived in a more simple way using a standard access list rather than an extended access list.


HTH


Rick

guruprasadr Fri, 05/09/2008 - 07:35
User Badges:
  • Gold, 750 points or more

Dear Rick,


But "i" feel more easy upon using Extended Access-list, since i have the clear classification to control.... :-)


Thanks for the recommendation, i agree to your POINT.


Thanks, Guru Prasad R

petersrule2003 Fri, 05/09/2008 - 17:46
User Badges:

CREATE A STANDARD ACCESS LIST TO MATCH THE ROUTEE TO BE REACHED .


SET A TAG FOR D ROUTE USING A ROUTE-MAP


AND THEN REDISTRIBUTE STATIC ROUTE WITH THAT TAG SET.

Actions

This Discussion