05-09-2008 06:05 AM - edited 03-05-2019 10:51 PM
Hello,
I want to redistribute an individual static route. I don't want to redistribute all static routes I have on my router. I believe i need to use the "redistribute static route-map" command but am not entirely sure of the correct syntax. I also believe I have to first create the route-map and populate the individual route into it... once again I need some assitance on that. :)
Any help would be appreciated...
05-09-2008 06:17 AM
HI William, [Pls Rate if HELPS]
Considering for a Scenario, having the EIGRP as the Protocol:
router eigrp 873
redistribute connected route-map eigrp
network xxx.xxx.xxx.xx 0.0.0.3
neighbor xxx.xxx.xxx.xx FastEthernet0/0.873
no auto-summary
Create an Extended ACL:
=======================
ip access-list extended eigrp
permit ip host xxx.xxx.xxx.xx any
permit ip xxx.xxx.xxx.xxx 0.0.0.7 any
Create an Route-MAP & Match the Extended ACL:
=============================================
route-map eigrp permit 10
match ip address eigrp
Hope I am Informative.
Pls RATE if HELPS
Best Regards,
Guru Prasad R
05-09-2008 06:30 AM
Hello Thanks for the reply...
I didn't mention but the protocol is OSPF
05-09-2008 06:40 AM
One other question...
Do you see any issue with the address that is being routed being a public IP?
Basically I am routing an individual public IP across my private network and out a different gateway :)
05-09-2008 06:43 AM
HI William, [Pls RATE if HELPS]
Doesn't matter, irrespective of Protocol but the Configuration style is same.
/32 Public Address can be routed very well to a different Gateway.
Pls RATE if HELPS
Best Regards,
Guru Prasad R
05-09-2008 07:29 AM
Guru
Using an extended access list for a route map to control redistribution makes it unnecessarily complicated. The same result can be acheived in a more simple way using a standard access list rather than an extended access list.
HTH
Rick
05-09-2008 07:35 AM
Dear Rick,
But "i" feel more easy upon using Extended Access-list, since i have the clear classification to control.... :-)
Thanks for the recommendation, i agree to your POINT.
Thanks, Guru Prasad R
05-09-2008 05:46 PM
CREATE A STANDARD ACCESS LIST TO MATCH THE ROUTEE TO BE REACHED .
SET A TAG FOR D ROUTE USING A ROUTE-MAP
AND THEN REDISTRIBUTE STATIC ROUTE WITH THAT TAG SET.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: