NATing outbound traffic from server

Unanswered Question
May 9th, 2008

Currently we have configured CSM in bridged mode where 106.101.X.Y is our client as well as server side Vlan. Currently requests from clients at Virtual Server IP: 106.101.X.Y3 are distributed between Real Server IP 106.101.X.Y1 and 106.101.X.Y2. Now we want to make sure that when these Real servers at IP 106.101.X.Y1 and 106.101.X.Y2 originate their outbound requests, they should be NATed to one IP address: 106.101.X.Y4. What will be the required configuration for this?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
yagnesh_tel Mon, 05/12/2008 - 13:19


I tried this with no luck, still comes out with native IPs and does not translate. Any other recommendation?


This Discussion