Cant access after VPN

Unanswered Question
May 9th, 2008
User Badges:

My remote access client are not able to ping inside network.

my concentrator is connected with core switch.

My is also connected in core switch. InterVLN routing is working fine. server and conncentrator is

able to reach other via core switch.

concentrator private Ip address

Public IP address:


Split tunnel is enable for,

Routing on concentrator is is connected via is connected via

Core switch Ip address is

Core switch also has the route

ip route

ip route

ip route

ip route

ip route

ip route

ip route

ip route

ip route

ip route,

As u have tested you are able to connect but not able to reach anywhere, though from internal network I can ping your vpn IP

In VPN session i can see sometimes bytes send and receive, and sometime only sending no recving.

No firewall involoved in the path between the concentrator and desired server

Both connected on same switch but different VLAN. but Inter VLAN routing is working and both are able to ping.

ONly remote access client is not able to reach anywhere.

VPN concentrator has public default filter on public interface and private filter on local interface.

Concentrator version is 4.7

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rkalia1 Fri, 05/09/2008 - 17:17
User Badges:

What is your split tunnel policy on Concentrator? Pls let know which options are selected.

wasiimcisco Fri, 05/09/2008 - 17:21
User Badges:

only tunnel specified network in the list.

which are already mentioned in the post.

My lan to lan tunnel is working fine, only problem with remote access vpn tunnel. same configuration, is working fine in another office without any problem, only problem here, i have checked the configuration so many times, but everytime i found it same. dont know which thing is missing


This Discussion