Guest WLAN

one3cap12 · ‎05-09-2008

I have 20+ Cisco Aironet 1100's. What I would like to do is create 2 SSID's 1 to be broadcasted and the other not. The one that is not broadcasted is going to be in use for 802.1x with a RADIUS server. The SSID that is broadcasted would like the be unsecured and have guests connect to it and then send that that signal to some sort of "portal" for a logon for the guests.

Seems I cannot do this now because the the security is a global option.

I cannot get one SSID to be unsecured and the other secured. Do I need VLAN's?

andrew.prince · ‎05-10-2008

If you purchase a Wireless Lan Controller - you can do all the above with the web portal.

If you are running in autonomous mode - IOS, then you can have most of the above, just not the web portal I stand corrected if you can.

HTH.

Scott Fella · ‎05-11-2008

Like Andrew mentioned, you would need an WLC to have custom web login pages. If this cost too much, you can try to 2hotpot or zonecd. Hope this helps...

-Scott
*** Please rate helpful posts ***