Hi can anyone help me to configure to use dot1x authentication method for my cisco 2960 switch.
I am trying to use microsoft IAS as a radius server.
i configured certificate cervices also and clients & computers are getting certificates.
i configured also my switch to use dot1x authentication as
aaa new-model
aaa authentication dot1x default group radius
interface f0/1
switchport mode access
dot1x system-auth-control
radius-server host 10.0.0.110 auth-port 1645 acct-port 1646 key ****
interface f0/1
dot1x port-control auto
but still my computer cannot connect to the switch
i debug dot1x all
and i got the result which i have attached with this message.