Aironet 350BR failed VxWorks to IOS conversion

Unanswered Question
May 11th, 2008
User Badges:

I have tried to upgrade VxWorks to IOS and by mistake uploaded AP-Upgrade-Image. After restart it gives me the following:

Cisco IOS automatic field upgrade image, ESC to terminate


upgrade: Compare ok first load file 0

upgrade: Compare ok first load file 1

upgrade: Compare ok first load file 3

upgrade: IOS Configuration component not available

upgrade: Invalid or missing installation key (BR350 not supported)!

Depress ESC key to reboot

Now BR350 has the following files:

Memory Bank total used left

DRAM 16738168 0 16738168

Config 524288 628 523660

FLASH 7733248 4291344 3441904

Memory Bank:File address size encoding type flags

a) Config:BR Installation Key FE020000 64 none Key 0000

b) Config:VAR Installation Key FE020040 52 none Key 0000

c) Config:AWC_ConfigDB FE020074 512 AiroDB1 Data 0000

d) FLASH :IOS_Upgrade 1.0 FE0A0000 393268 none Exec 0801

e) FLASH :IOS_C350_BOOT 2 FE100034 393256 none 0x09 0800

f) FLASH :IOS_C350_TAR 2 FE16005C 3467304 none 0x0A 0800

g) FLASH :IOS_Upgrade_Envs 1.0 FE4AE884 136 none 0x0C 0800

h) FLASH :AWC PCMCIA FPGA 0.14 FE4AE90C 37380 none FPGA 0000

When I press Ctrl+W I have the following options:

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

I can't copy to Flash. When I copy to DRAM Vxworks image file and try to run

Any chance to fix it?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
agipkcolon Thu, 05/15/2008 - 19:57
User Badges:

When I copy to DRAM Vxworks image file and try to run it gives me error on decompressing image.

How can I manualy decompress .img file?


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode