dail-peer with MGCP

Unanswered Question
May 11th, 2008
User Badges:

hi guys ,


do i need to configure the dial peer for voice ports or endpoint on the router if im using MGCP or it will be created automatically when the router download config from the CCM? . by the way i have not seen dail- peer after successfull config download on running config. for E1 ISDN, FXO , FXS

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Sun, 05/11/2008 - 17:33
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

do you have configured the ccm-manager config server??


if not that's why the config is not being sent


if not, you can configure them manually adding the application mgcpapp for those dial-peers


HTH


javalenc


if this helps, please rate

t-alkhalidi Mon, 05/12/2008 - 03:21
User Badges:

well yes i configured the ccm-manager config server and already downloaded the config and the gateway registred and the endpoint as well. but i dont see dail-peer configurtion. why do i need dial-peer in mgcp? ALREADY UNDER VOICE PORTS APPLICATION Mgcp. IS THERE DIFFERRENCE CONIFG FOR DIAL-PEER BETWEEN ANALOG fxO AND e1 isdn

Jaime Valencia Mon, 05/12/2008 - 08:17
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

the basic difference is the port to which you refer when configuring the dial peer


HTH


javalenc


if this helps, please rate

Actions

This Discussion