05-12-2008 11:54 AM - edited 03-03-2019 09:55 PM
Pardone my ignorance, but I'm new to cisco products.
I'm trying to configure a router. What's the command to add an ip address to interface serial0?
Solved! Go to Solution.
05-12-2008 12:07 PM
go to the interface config mode and type the ip address
interface serial 0
ip address
have a look at the interface config guide for other parameters that may be needed on the serial interface
http://www.cisco.com/en/US/docs/ios/12_2/interface/configuration/guide/icfserin.html#wp1012526
Narayan
05-12-2008 12:07 PM
go to the interface config mode and type the ip address
interface serial 0
ip address
have a look at the interface config guide for other parameters that may be needed on the serial interface
http://www.cisco.com/en/US/docs/ios/12_2/interface/configuration/guide/icfserin.html#wp1012526
Narayan
05-12-2008 01:37 PM
Thanks that works!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide