cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
496
Views
0
Helpful
2
Replies

association issues with mac authentication & radius

jlhainy
Level 2
Level 2

I am working on using WPA2-SPK and mac authentication with a radius server. When I use the local database on the WLC, all works fine. When I am trying to use the radius server (ACS 4.1) I get the following in the WLC logs.

May 12 14:24:11.684 apf_80211.c:2552 APF-4-ASSOCREQ_PROC_FAILED: Failed to process an association request fromxx:xx:xx:xx:xx:xx. WLAN:3, SSID:SLCSD. mobile in exclusion list or marked for deletion.

On the ACS box, I was also getting invalid password, however, I entered the mac address as a user and the mac address as a password with no type-o's and I did not cut & paste so as to produce "phantom" charecters.

Anyone else have this issue? Use WLC 4.2

Failed to process an association request from 00:13:ce:37:8b:ff.

WLAN:2, SSID:TMDInternal-WPA. Mobile excluded or marked for deletion.

2 Replies 2

jlhainy
Level 2
Level 2

ok, my issue appears to be one with ACS. I have an ACS 3.3 appliance and a 4.1 appliance. The 3.3 is working great with wpa-spk and mac filtering but the 4.1 is not. They are configured the same.

Take a look at CSCsh62641 and see if it applies to your situation.

Hope this helps,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card