05-13-2008 12:22 AM - edited 07-03-2021 03:51 PM
Hi
When I try to add new Controller in the WCS (ver. 4.1.91.0) I get this error:
âFailed to add device to WCS Reason: Object not found in deviceâ
The Controller has been added earlier a then deleted again. When I try to re-add the controller again, I get the above error. It's a WLC2106 I'm trying
Both the WCS and the new Controller works fine, and I have tried to boot them both.
Still get the same error when trying adding.
Anyone know what it could be?
TIA
Peter
Solved! Go to Solution.
05-15-2008 02:46 AM
Yes I would do that, or revert your controller to 4.1.185 if this version works well for you...
05-14-2008 10:14 AM
Which code is your controller running?
If your new controller code is not 4.1.X, this is a typical effect... WCS and controller should share the same major version...
hth
Jerome
05-14-2008 09:54 PM
Hi Jerome
The WLC2106 is running version 4.2.112.0.
I also have a WLC-4402 that is running 4.1.185.0.
Do you suggest that I upgrade the WLC-4402 to version 4.2.112.0. and the WCS to version 4.2.81.0.? Then all are running 4.2.x.x
TIA
Peter
05-15-2008 02:46 AM
Yes I would do that, or revert your controller to 4.1.185 if this version works well for you...
06-03-2008 04:05 AM
af follow up...
After reinstalling to 4.1.185 I don't have the problem any more.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide