static translation not working

Unanswered Question
May 13th, 2008

I have ASA 5520 with 3 interfaces: inside, outside and dmz. I have a router on the outside with lo 0, which I cannot ping from the dmz. I do have a static translation dmz, outside. The route is also there in the ASA to reach the lo 0. I checked the syslog and found out that the ASA is thinking that is inside and that is why I could not ping it. I'm new to the ASA appliance. Can anyone help me on how I can make this work ? Thanks so much.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
jeanaguemon Tue, 05/13/2008 - 13:05

It is not a routing issue. is on the outside of the firewall and the ASA thinks it is inside. I need to know how I could make the ASA know that is on the outside.


Jon Marshall Tue, 05/13/2008 - 22:44

"I'm new to the ASA appliance".

"It is not a routing issue"

Not saying it definitely is a routing issue but for someone who is new to the ASA device and is posting for help you seem to have made your mind up what the issue is already :-)

Please post full ASA config + the routing table.



This Discussion