IOS compatbility with Hardware ( ADSL/BGP)

Unanswered Question
May 13th, 2008

Hello,

I need help, will appreciate it greatly if someone can assist.

Following is the output from my Router. I need to have an IOS which recognizes my ADSL WIC card plus i can configure BGP also. Problem is i can't seem to locate the IOS with my Memory/HARDWARE which can support ADSL plus BGP. Any help will be appreciated.

Commerce-Valley-CE#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Mon 17-Mar-08 15:24 by dchih

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

Commerce-Valley-CE uptime is 8 minutes

System returned to ROM by power-on

System image file is "flash:c2600-ipbase-mz.123-26.bin"

cisco 2620XM (MPC860P) processor (revision 0x100) with 49152K/16384K bytes of memory.

Processor board ID JAD071305V5 (1789417009)

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 ATM network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

--------------------------------

Commerce-Valley-CE# sh diag

Slot 0:

C2621XM 1FE Mainboard Port adapter, 3 ports

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 1.0

PCB Serial Number : JAD071305V5 (1789417009)

Part Number : 73-7753-02

RMA History : 00

RMA Number : 0-0-0-0

Board Revision : B0

Deviation Number : 0-0

Product (FRU) Number : C2620XM-1FE

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 6C 41 01 00 C1 18 4A 41 44 30 37 31

--------------------------------------------------------

WIC Slot 0:

FT1 BT8360

Hardware revision 1.3 Board revision C0

Serial number 27467070 Part number 800-03279-04

FRU Part Number WIC-1DSU-T1=

Test history 0x0 RMA number 00-00-00

Connector type Wan Module

EEPROM format version 2

EEPROM contents (hex):

0x20: 02 11 01 03 01 A3 1D 3E 50 0C CF 04 00 00 00 00

0x30: 60 00 00 00 01 12 15 01 FF FF FF FF FF FF FF FF

WIC Slot 1:

DSL SAR (ADSL)

Hardware Revision : 2.3

Part Number : 73-4771-09

Board Revision : C0

Deviation Number : 0-0

Fab Version : 05

PCB Serial Number : FOC08121WNG

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : PA-1C-P=

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 09 42 43 30

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Tue, 05/13/2008 - 12:06

Any 12.4 IOS will do that, the issue is that you need customer-level access (support contract) to download, and expanded flash and ram to use it.

Actions

This Discussion