05-13-2008 11:30 AM - edited 03-03-2019 09:56 PM
Hello,
I need help, will appreciate it greatly if someone can assist.
Following is the output from my Router. I need to have an IOS which recognizes my ADSL WIC card plus i can configure BGP also. Problem is i can't seem to locate the IOS with my Memory/HARDWARE which can support ADSL plus BGP. Any help will be appreciated.
Commerce-Valley-CE#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 15:24 by dchih
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Commerce-Valley-CE uptime is 8 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipbase-mz.123-26.bin"
cisco 2620XM (MPC860P) processor (revision 0x100) with 49152K/16384K bytes of memory.
Processor board ID JAD071305V5 (1789417009)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ATM network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
--------------------------------
Commerce-Valley-CE# sh diag
Slot 0:
C2621XM 1FE Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
PCB Serial Number : JAD071305V5 (1789417009)
Part Number : 73-7753-02
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : B0
Deviation Number : 0-0
Product (FRU) Number : C2620XM-1FE
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 6C 41 01 00 C1 18 4A 41 44 30 37 31
--------------------------------------------------------
WIC Slot 0:
FT1 BT8360
Hardware revision 1.3 Board revision C0
Serial number 27467070 Part number 800-03279-04
FRU Part Number WIC-1DSU-T1=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 2
EEPROM contents (hex):
0x20: 02 11 01 03 01 A3 1D 3E 50 0C CF 04 00 00 00 00
0x30: 60 00 00 00 01 12 15 01 FF FF FF FF FF FF FF FF
WIC Slot 1:
DSL SAR (ADSL)
Hardware Revision : 2.3
Part Number : 73-4771-09
Board Revision : C0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : FOC08121WNG
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : PA-1C-P=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 09 42 43 30
05-13-2008 12:06 PM
Any 12.4 IOS will do that, the issue is that you need customer-level access (support contract) to download, and expanded flash and ram to use it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: