05-14-2008 02:27 AM - edited 03-03-2019 09:56 PM
Hi,
I have connected any IP phone to switch and PC to phone, and specify the voice VLAN and data VLAN seperately.
Is there any other command required in order to get the devices get an IP address from the exact VLANS( Voice and Data).
Thanks
Eldo
05-14-2008 02:40 AM
No other commands needed, of course you need a seperate dhcp servers for data and voice. The latter is usually CM or CME.
Hope this helps, please rate post if it does!
05-14-2008 02:51 AM
Is it possible to do it with a single DHCP server.
05-14-2008 02:55 AM
Hi
U can do it but its better to have the dhcp scopes on the CM for IP phones as it acts as tftp server also and ip phones needs some tftp options.
For data u can use the other server.
Thanks
Mahmood
05-14-2008 02:40 AM
Hi
Ensure that u have configured spanning-tree porfast and u have the respective dchp scopes configured.
Thanks
Mahmood
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide