05-14-2008 03:02 AM
Hi,
I got a PIX 506E that has been discovered and collected from Campus Manager.
However, inventory collection fails with the PIX 506E, while all credentials are ok and tested.
Transport Session to device failed. Cause Authentication failed on device.
May be the problem could be with the SNMP CREDENTIALS ro and rw
Solved! Go to Solution.
05-14-2008 06:23 AM
There are a few things you can try to see which credentials are failing
First perform a check device credentials and see which are failing...snmp, telnet, ssh...
Then do a packet capture during inventory collection to see where authentication is failing. I would check the telnet/ssh credentials.
05-14-2008 06:23 AM
There are a few things you can try to see which credentials are failing
First perform a check device credentials and see which are failing...snmp, telnet, ssh...
Then do a packet capture during inventory collection to see where authentication is failing. I would check the telnet/ssh credentials.
05-14-2008 07:48 AM
Thx, its fine now.
I had SNMP v2/1 and v3 credentials configured while the PIX uses only SNMP V1.
I removed the SNMP v1 and it is fine now.
Cheers,
Ashley
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: