Trying to get CiscoView device manager to work on 6500

Unanswered Question
May 14th, 2008

Hi,

I downloaded 2 files from cisco:

cvdm-c6500chassis-19.0.tar

and

cvdm-c6500-1.1.tar

I started to install " archive " command from tftp to bootflash:

Made sure there was enough space on bootflash.

the HTTP config is:

ip http server

ip http authentication local

ip http path bootflash:

I have several users configure on this switch, yet when I try to login with one of the users, I get an invalid userna,e or password...?!?

Line vty 0 4 is setup as :

line vty 0 4

access-class 101 in

exec-timeout 9 0

privilege level 0

password 7 xxxxxxx

transport preferred ssh

transport input lat pad mop udptn telnet rlogin ssh nasi acercon

Why can't I login?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Wed, 05/14/2008 - 12:13

What version of code, and what supervisor? CVDM is more or less dead, and will not work with newer versions of code, and newer supervisors. It is recommended you move to CiscoWorks LAN Management Solution with CiscoView.

Actions

This Discussion